1/13
ScanMyOpel Lite screenshot 0
ScanMyOpel Lite screenshot 1
ScanMyOpel Lite screenshot 2
ScanMyOpel Lite screenshot 3
ScanMyOpel Lite screenshot 4
ScanMyOpel Lite screenshot 5
ScanMyOpel Lite screenshot 6
ScanMyOpel Lite screenshot 7
ScanMyOpel Lite screenshot 8
ScanMyOpel Lite screenshot 9
ScanMyOpel Lite screenshot 10
ScanMyOpel Lite screenshot 11
ScanMyOpel Lite screenshot 12
ScanMyOpel Lite Icon

ScanMyOpel Lite

Car Diagnostic Solutions
Trustable Ranking Icon인증완료
2K+다운로드
8MB크기
Android Version Icon4.0.1 - 4.0.2+
안드로이드 버전
1.1.25(08-02-2021)최신 버전
-
(0 리뷰)
Age ratingPEGI-3
다운로드
세부 정보리뷰버전정보
1/13

ScanMyOpel Lite의 설명

*** Attention!! ***


CAN-bus models, like Vectra C, Astra H, Zafira B, Corsa D, Insignia, Astra J, etc,. are not and will be not supported in this app! Please do not leave negative reviews only because you could not find these models in the application!


The app for the newer models ScanMyOpelCAN can by found here:

https://play.google.com/store/apps/details?id=com.ScanMyOpelCAN2.Main


*********************


Demo version of ScanMyOpel software for Opel/Vauxhall diagnostics. It is primarily targeted for car enthusiasts to let them diagnose their own cars.


Now in English, Russian, Hungarian, Polish, German and Finnish!!


Now supports Engine, ABS, Automatic Transmission, SRS, Power Steering and BCM diagnostics!


ScanMyOpel Lite features include:

- native support of Electronic control units used in Opel/Vauxhall cars, which distinguishes ScanMyOpel from many other diagnostic applications providing only limited generic OBDII support

- monitoring various dynamic parameters of engine, automatic transmission, ABS, Power steering and other ECUs

- reading of static data: ECU identification, fault codes with their current statuses and symptoms

- clearing of fault codes

- (Full version only) Displaying environment information on trouble codes where applicable

- (Full version only) Displaying nominal values of livedata parameters where applicable

- Actuator tests for selected ECUs.


The limitations of the demo version are:

- No active diagnostic procedures available

- The number of displayed trouble codes is limited by one

- The number of monitored parameters is limited by two to five

- Only 1 actuator test procedures will be available

- No additional info on faults codes and livedata parameters

- Ads will be displayed

- Trouble codes can not be erased on ECUs, other then Engine ECU


Fault code status meanings:

red - present

yellow - intermittent

green - not present


During actuator tests it is possible to monitor livedata parameters. Actuator test lasts 30 seconds, then it stops automatically. User can stop test at any time before 30 seconds expired.


Current software version supports ONLY engines of the following Opel/Vauxhall models:

- Agila A

- Astra F (MY96+)

- Astra G

- Corsa B (MY97+)

- Corsa C

- Frontera A (25TDS engine)

- Frontera B (X22DTH/Y22DTH engines only)

- Meriva A

- Omega B (MY97+, except X25XE/X30XE/X20SE/Y25DT engines)

- Speedster

- Tigra (MY97+)

- Tigra B

- Vectra B

- Zafira A


The ECU type is detected automatically.


ScanMyOpel supports ELM327-based Bluetooth/WiFi interfaces on all Android devices. Please note - could be compatibility issues with some noname ELM327 interfaces. If you are experiencing problems with establishing stable connection with the ELM327 interface, please send us logs files for troubleshooting.


Recommended ELM327 version is 1.4/1.4+. Proper connection with Chinese versions of ELM327, other then 1.4 is not guaranteed. Recommended interface - ObdLinkMX.

Dont use cheap Chinese v2.1 ELM adapters, they in most of the case will not be able to work properly with our application.


Additional info on recommended interfaces:

http://www.opel-scanner.com/forum/index.php?topic=2574.0


In case of any issues with app it is possible to save log and forward it on info@opel-scanner.com for troubleshooting. From application's slider menu it is possible to enable logging as well as to send logs to us.


Attention!!

Please connect together pins 7, 3 , 12 and 8 in your ELM 327 interface.

On some model diagnostic of AT/ABS can be connected to pin 3 or 12 in the OBD plug. Since in ELM only used pin 7, you may not get connected to other modules.


Your comments and feedback are welcomed!


*** Feel free to email (info@scanmyopel.com) us directly for issues and support before commenting with low ratings. Thanks! ***


Support forum can be found here:

http://www.opel-scanner.com/forum/index.php?board=40.0


ScanMyOpel Lite - 버전 1.1.25

(08-02-2021)
다른 버전들
뭐가 새롭나 - Improved connection stability with some old ECUs

아직 평가나 리뷰가 없습니다! 첫 번째로 남겨 보세요

-
0 Reviews
5
4
3
2
1

ScanMyOpel Lite - APK 정보

APK 버전: 1.1.25패키지: com.ScanMyOpelLite.Main
안드로이드 호환: 4.0.1 - 4.0.2+ (Ice Cream Sandwich)
개발자:Car Diagnostic Solutions권한:7
이름: ScanMyOpel Lite크기: 8 MB다운로드: 367버전 : 1.1.25출시 날짜: 2025-05-18 02:18:02최소 스크린: SMALL지원되는 CPU:
패키지 ID: com.ScanMyOpelLite.MainSHA1 서명: 0F:BE:32:58:87:F4:CD:64:BC:E3:E3:89:26:FA:C4:EA:CF:7A:14:5D개발자 (CN): Artur Gyumushyan단체 (O): CarDiagnosticSolutions로컬 (L): Toronto나라 (C): CA주/시 (ST): ON패키지 ID: com.ScanMyOpelLite.MainSHA1 서명: 0F:BE:32:58:87:F4:CD:64:BC:E3:E3:89:26:FA:C4:EA:CF:7A:14:5D개발자 (CN): Artur Gyumushyan단체 (O): CarDiagnosticSolutions로컬 (L): Toronto나라 (C): CA주/시 (ST): ON

ScanMyOpel Lite의 최신 버전

1.1.25Trust Icon Versions
8/2/2021
367 다운로드8 MB 크기
다운로드